Go to navigation links
Solid timber panels

Cherry - Finger Jointed Panels & Worktops

Cherry finger jointed panel
  • Special order item
  • 18mm-45mm (composites up to 100mm)
  • Maximum size 5300x1210mm
  • Non-stock items typically available to special order within 2-3 weeks
  • Pallets (20) / mini-bundles (10) / some minimum 5 per item
  • Supplied unfinished or with various coatings such as clear lacquer, oils, etc.
  • D3 bonded for limited high moisture conditions

Construction

Winwood Products is a supplier of the following Cherry finger jointed panels & worktops:

Specially ordered in pallets of 20 per item, these finger jointed panels & worktops are constructed from 40mm wide Cherry strips of varying length (250mm-600mm). The the strips are end-jointed with a finger joint profile (which is stronger than the natural wood) to achieve the panel length, and these jointed strips bonded together to achieve the final panel size.

This panel can also be produced using 20mm wide strips.

The Cherry strips making up the panel core and faces are bonded together with formaldehyde-free D3 water resistant glue, and the faces calibrated to 80 grit before being protected with shrinkwrapping

The panels can be supplied as produced, or cut or machined to pattern. They can also be supplied prefinished with lacquer, oil, wax or special finishes as required.

Please click on the main Cherry page for details of the wood

Information

Technical details (general)

  • Construction:
    • Full thickness Cherry strips ranging in length 250mm-600mm, finger jointed for length before edge-gluing together to produce the panel
      Usually ordered in 40mm individual stave width, these panels & worktops can also be produced using 20mm wide strips
  • Standard thickness:
    • 40mm staves:
      18mm, 19mm, 25mm, 26mm, 27mm, 40mm, 42mm, 45mm
    • 20mm staves:
      20mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 40mm
  • Special sizes:
    • All panels made to order up to maximum 5300x1210mm
  • Standard Finish:
    • Calibrated with 80 grit
  • Packaging:
    • Faces protected with shrinkwrapping
  • Tolerances:
    • Length/width: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
    • Thickness: +0.2mm, -0.5mm
    • (Others by arrangement)
  • Face grades:
    • A face / B reverse
    • Other grading by arrangement
  • Bonding Quality:
    • D3 - High moisture applications
  • Other features:
    • Other woods can be incorporated into the construction of the panel to achieve a decorative or contrasting effect