Go to navigation links
Solid timber panels

Redheart Beech Edge Glued Panels & Worktops

Redheart Beech Triply 3-layer panel
  • 18mm to 60mm thick - others by arrangement (composites up to 100mm)
  • Maximum size 5300x1210mm
  • Non-stock items typically available to special order within 2-3 weeks
  • Pallets (20) / mini-bundles (10) / some minimum 5 per item
  • Supplied unfinished or with various coatings such as clear lacquer, oils, etc.
  • D3 bonded for limited high moisture conditions

Overview

Redheart beech (also called beech kern) is sourced from European Beech, which is found all all over Europe, and is one of the most frequent and important European species.

Normally, there is no clear distinction by colour between European Beech sapwood and heartwood, which can both be whitish (sometimes with a reddish hue), reddish-brown, and often brown in older trees. However, some beech logs show an irregular dark reddish heart or 'kern' effect, said to be caused by severe frosts, which gives an attractive striped appearance.

Dried beech is stronger than oak in bending strength, stiffness and shear by some 20 per cent, and considerably stronger in resistance to impact loads.

On the whole, European Beech works fairly readily, and is capable of a good smooth surface. This factor varies somewhat to growth characteristics and dried condition. The wood turns well and takes glue readily.

Panel Types

Winwood Products is a supplier of Redheart Beech panels & worktops offering the following configurations/options:

Redheart Beech - 'Triply' three-layer panels & worktops

(Click heading or image for full details of thicknesses & panel sizes)

Three-layer redheart beech 'triply' panels & worktops
  • Special order in minimum 5 sheets per item
  • 20mm & 26mm thick
  • Standard panel sizes from 810x1250mm up to max. 2500x1250mm
  • D3 water resistant bonding
  • Calibrated to 80 grit as standard
  • Faces protected with shrinkwrapping
  • Can be supplied raw or coated with various coatings such as clear lacquer or oil

Specially ordered in minimum quantity of 5 per item, Redheart Beech Triply three-layer panels are constructed from 5mm full-length faces bonded either side of a cross-banded 10mm or 16mm finger jointed core. The faces are made from strips of random width of 50-140mm wide.

Can be supplied cut or machined to pattern, and prefinished with lacquer, oil, wax or special finishes

Redheart Beech - Full length stave panels & worktops

(Click heading or image for full details of thicknesses & panel sizes)

Full length redheart beech panels & worktops
  • Special order in pallet quantities
  • 19mm to 45mm thick
  • Available 800-2500x1210mm & 900-2100x650mm
  • D3 water resistant bonding
  • Calibrated to 80 grit as standard
  • Faces protected with shrinkwrapping
  • Can be supplied raw or coated with various coatings such as clear lacquer or oil

Specially ordered in pallets of 20 per item, full length Redheart Beech panels are constructed from full thickness, full length strips. The strips are random width of 40-90mm wide, with each panel made from a single width of strip.

Can be supplied cut or machined to pattern, and prefinished with lacquer, oil, wax or special finishes

Redheart Beech - Finger jointed panels & worktops

(Click heading or image for full details of thicknesses & panel sizes)

Fingerjointed redheart beech panels & worktops
  • Special order in pallet quantities
  • 18mm to 60mm thick
  • Any size up to max. 5300x1210mm
  • D3 water resistant bonding
  • Calibrated to 80 grit as standard
  • Faces protected with shrinkwrapping
  • Can be supplied raw or coated with various coatings such as clear lacquer or oil

Specially ordered in pallets of 20 per item, finger jointed Redheart Beech panels are constructed from full thickness, finger jointed strips 28-45mm wide (usually 40mm) x 250mm-600mm long.

This product is also available constructed from 20mm wide staves in 20mm, 25mm, 30mm & 40mm thickness.

Can be supplied cut or machined to pattern, and prefinished with lacquer, oil, wax or special finishes

Information

Technical details (general)

  • Special sizes:
    • In principle, any size can be produced up to the maximum stated above
  • Tolerances:
    • Length/width: typically +5mm/-3mm
    • Thickness: typically ±0.2mm
    • (Others by arrangement)
  • Face grades:
    • A/B, others by arrangement
  • Bonding Quality:
    • D3 - High moisture applications
  • Other features:
    • Other woods can be incorporated into the construction of the panel to achieve a decorative or contrasting effect