Go to navigation links
Solid timber panels

Maple Edge Glued Panels & Worktops

Maple Triply 3-layer panel
  • 18mm to 60mm thick - others by arrangement (composites up to 100mm)
  • Maximum size 5300x1210mm
  • Typical pallet size = 10 sheets per item
  • Supplied raw or coated with various coatings such as clear lacquer or oil
  • B3 bonded for high moisture conditions

Overview

Maple heartwood is commonly creamy white or light reddish-brown with deeper-coloured late-wood bands, while the sapwood is white in colour, and furnishes the white maple prized for certain decorative uses. the wood is straight-grained and fine textured.

Maple works well, and the timber can be stained, polished and glued satisfactorily, although it can be hard to nail or screw, although these are held firmly once in place.

In detail

Winwood Products is a supplier of Maple panels & worktops offering the following configurations/options:

Maple - 'Triply' three-layer panels & worktops

(Click heading or image for full details of thicknesses & panel sizes)

Three-layer maple 'triply' panels & worktops
  • Special order in pallet quantities
  • 20mm & 26mm thick
  • Standard panel sizes from 810x1250mm up to max. 2500x1250mm
  • B3 water resistant bonding
  • Calibrated to 80 grit as standard
  • Faces protected with shrinkwrapping
  • Can be supplied raw or coated with various coatings such as clear lacquer or oil

Specially ordered in minimum quantity of full pallets per item, Maple Triply three-layer panels are constructed from 5mm full-length faces bonded either side of a cross-banded 10mm or 16mm finger jointed core. The strips are random width of 60-140mm wide, with each panel made from a single width of strip.

Can be supplied cut or machined to pattern, and prefinished with lacquer, oil, wax or special finishes

Maple - Full length stave panels & worktops

(Click heading or image for full details of thicknesses & panel sizes)

Full length maple panels & worktops
  • Special order in pallet quantities
  • 19mm to 45mm thick
  • Available 800-2500x1210mm & 900-2100x650mm
  • B3 water resistant bonding
  • Calibrated to 80 grit as standard
  • Faces protected with shrinkwrapping
  • Can be supplied raw or coated with various coatings such as clear lacquer or oil

Specially ordered in minimum quantity of full pallets per item, full length Maple panels are constructed from full thickness, full length strips. The strips are random width of 40-90mm wide, with each panel made from a single width of strip.

Can be supplied cut or machined to pattern, and prefinished with lacquer, oil, wax or special finishes

Maple - Finger jointed panels & worktops

(Click heading or image for full details of thicknesses & panel sizes)

Fingerjointed maple panels & worktops
  • Special order in pallet quantities
  • 18mm to 60mm thick
  • Any size up to max. 5300x1210mm
  • B3 water resistant bonding
  • Calibrated to 80 grit as standard
  • Faces protected with shrinkwrapping
  • Can be supplied raw or coated with various coatings such as clear lacquer or oil

Specially ordered in minimum quantity of full pallets per item, finger jointed Maple panels are constructed from full thickness, finger jointed strips 28-45mm wide (usually 40mm) x 250mm-600mm long.

This product is also available constructed from 20mm wide staves in 20mm, 25mm, 30mm & 40mm thickness.

Can be supplied cut or machined to pattern, and prefinished with lacquer, oil, wax or special finishes

Information

Technical details (general)

  • Special sizes:
    • In principle, any size can be produced up to the maximum stated above
  • Tolerances:
    • Length/width: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
    • Thickness: +0.2mm, -0.5mm
    • (Others by arrangement)
  • Face grades:
    • A/B, others by arrangement
  • Bonding Quality:
    • B3 - High moisture applications
  • Other features:
    • Other woods can be incorporated into the construction of the panel to achieve a decorative or contrasting effect